Mercedes-Benz GLA Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
816 Posts
60mm
 

·
Registered
Joined
·
816 Posts
My apologies for giving out incorrect info…need to learn to know how to read my digital caliper. 66.5 mm is correct
 

·
Registered
Joined
·
113 Posts
I keep wondering if the 66.5 mm listed in the ink I posted above is a misprint. Practically every other MB listed, particularly the "A" class and CLA vehicles (which all have the same platform as the GLA) have the center bore listed at 66.6 mm. Or does .1 mm not make any difference?
 

·
Registered
Joined
·
48 Posts
I keep wondering if the 66.5 mm listed in the ink I posted above is a misprint. Practically every other MB listed, particularly the "A" class and CLA vehicles (which all have the same platform as the GLA) have the center bore listed at 66.6 mm. Or does .1 mm not make any difference?
Very slight difference. Perhaps the axle hub is 66.5mm and the wheel bore is 66.6mm.
 

·
Retired Moderator
Joined
·
378 Posts
0.1 mm is a mere 0.0039 inch to those of us who still think in English units.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top