Mercedes-Benz GLA Forum banner
1 - 4 of 4 Posts

· Premium Member
Joined
·
288 Posts
Just search for CLA spacers, and only use high quality from H&R or Eibach. Be sure to make proper measurements for the length of extended lugs you will use as well. If the lugs are too long, they can damage the parking brake, which has happened on a lot of Benz's in the past.

Order your lugs from H&R as well. You will have to call them. You do NOT want to risk using cheap eBay lugs that can fail.

I may be adding spacers to mine soon for widened stability
 

· Premium Member
Joined
·
288 Posts
Sounds right.

BTW, +35 offset on an 8" or 8.5" wheel lines up perfectly flush in case anyone reading this is looking to fit new wheels.

My wheels could only be bought in +45, so I will be adding +15 spacers because I want some slight 'poke' and a wider stance for the bit of off-roading we do in our GLA. I have more clearance than most, so I'm not concerned about rubbing LOL
 

· Premium Member
Joined
·
288 Posts
Ive spoken to H&R and they gave me options from 5mm-25mm

by looking at it I will probably end up 10mm front and 15mm rear

I will let you know if the next few days or week
What length and size lug bolts did they give you for that setup? I think that's what I'm going to do. Thanks!
 

· Premium Member
Joined
·
288 Posts
Thanks for posting the thread length!

I am putting 15mm spacers on the rear of mine this week, I'll post pics ASAP
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top