Mercedes-Benz GLA Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I found mags
Bolt pattern 5 x 112
7.5
Offset ET52.


How do i know of it fits my gla 2021, knowing on the sticker on the drivers door i see 7.5 jx18 . But no offset.
Thanks.

Sent from my SM-N960W using Tapatalk
 

·
Registered
MY18 GLA 220d, MY 18 GLA 250 4matic edition 1.
Joined
·
165 Posts
I found mags
Bolt pattern 5 x 112
7.5
Offset ET52.


How do i know of it fits my gla 2021, knowing on the sticker on the drivers door i see 7.5 jx18 . But no offset.
Thanks.

Sent from my SM-N960W using Tapatalk

This should sort you out. Then you can use the following.


Hope this helps.
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·

This should sort you out. Then you can use the following.


Hope this helps.
I don't know if it is complicated, or is it me... q
Well i still didn't know if the Et 52 will fit the gla 2021!

Sent from my SM-N960W using Tapatalk
 

·
Super Moderator
Joined
·
710 Posts
It is somewhat complicated, as the size of the front calipers in particular is always the main component to be accommodated. Clearing same in both width and depth, with the latter interior spoke clearance usually the stumbling block. Note that your cited ET52 is quite "tucked into" the wheel wheel (the higher the positive offset so, with a lower number being more pushed out towards the exterior of the fender).
Alas the only way to be absolutely sure is personal experience of others or a shop that will let you test the fit prior to purchase.
Since you didn't list the brand and model it's difficult to comment further.
I don't know if it is complicated, or is it me... q
Well i still didn't know if the Et 52 will fit the gla 2021!

Sent from my SM-N960W using Tapatalk
 

·
Registered
MY18 GLA 220d, MY 18 GLA 250 4matic edition 1.
Joined
·
165 Posts
I don't know if it is complicated, or is it me... q
Well i still didn't know if the Et 52 will fit the gla 2021!

Sent from my SM-N960W using Tapatalk
These are the numbers you need to know. It looks like your current ET is 53 so I shouldn't think that a difference of 1mm is going to make a huge difference, but run the numbers on the second link I gave you and you should see how the difference is.

 
1 - 5 of 5 Posts
Top