Mercedes-Benz GLA Forum banner

1 - 10 of 10 Posts

·
Super Moderator
Joined
·
1,558 Posts
The original display is secured with two torx screws that insert downward between the dash on the display. To see these screws you must first remove a couple of small plastic covers. Once you remove the screws the screen lifts off. Cables canbe unplugged.

From what I've read on the new displays replacement should pretty much be the reverse but you may have to install an adaptor.
 

·
Registered
Joined
·
12 Posts
I did not have the courage to do it myself. Had it professionally installed. You have to remove the entire front existing unit and plug in cable adaptors in the existing ports. If you install it yourself, make sure your order the tool kit as you also need to remove the vents and the front dash.
 

·
Registered
Joined
·
1 Posts
How long does it take for the screen to be active after starting the car?

What about time for camera to show up between start car -> immediately put in reverse?
 
1 - 10 of 10 Posts
Top